Product Description
Product features:
Use latest standard H.265 video compression technology, High compression ratio,accurate and stable stream control ,support dual stream
Use 1/1.7 inch 12.0MP CMOS, Sony high performance image sensor
3X optical zoom, focus faster, zoom process with clear throughout
Built-in automatic night and day double filter switching mechanism, with manual or automatic color
Support dual stream
Support network disconnection, motion detection, video block intelligence, intelligent defocus detection and alarm
Support intelligent coding control
Max supports 4 ROI regions of interest
Support rich network protocol
1/1.7" 12.0MP/4000*3000@15FPS 1/1.9" 4K 4096*2160@25/30fps
Support D-WDR, 3D noise reduction
Support ONVIF protocol, GBT28181
| Model | IP19VS226D-AZ3611 |
| IPC | |
| Image sensor | 1/1.7 Inch 12MP IMX226 |
| CPU | Hi3519v101 |
| Effective pixels | 4000(H)x 3000(V) |
| Scan system | progressive scanning |
| Electronic shutter | 1/25s~1/10000s automatic regulation |
| Min illuminator | Color: 0.0001Lux@F1.2, |
| S/N Ratio | ≥50dB(AGC OFF) |
| IR Cut | ICR |
| WDR | > 80dB |
| Noise reduction | 3D noise reduction |
| Privacy masking | Up to 4 privacy masking |
| Lens type | 3X optical zoom lens,YTOT3.6-11mm 4K Motorized lens |
| Video datesheet | |
| Compression | H.265/H264/MJPEG |
| Main stream | 1/1.7" 4000*3000, 1-15fps 1/1.9" DCI 4K 4096*2160, 1-25(30)fps UHD 4K 3840*2160, 1-25(30)fps 5MP 2592*1944, 1-25(30)fps |
| Sub stream | D1 704*576, 1-25(30)fps VGA 640*480, 1-25(30)fps QVGA 320*240, 1-25(30)fps |
| Video frame | 1 ~ 25fps (50HZ) 1 ~ 30fps (60HZ) |
| Video bit rate | 32KB ~ 16Mbps, adjustable (VBR) and fixed bit rate (CBR) |
| Image setting | Adjustable brightness, contrast, saturation, sharpness, white balance AWB(automatic white balance), support privacy area occlusion |
| Smart Function | |
| Smart Coding | Support low bit rate, low latency, enhanced coding of ROI area, up to 4 ROI area |
| Smart detection | Support intelligent occlusion detection and intelligent defocus detection |
| Smart control | Support intelligent control, alarm opening/ shutdown, trouble shooting and intelligent noise reduction |
| Network | |
| Network interface | 10M/100M Adaptive Ethernet port |
| Network protocol | IPv4, HTTP, TCP/IP, UDP, RTP, RTCP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP |
| Access standard | Support latest ONVIF/GB28181 |
| Client user | Up to 8 user at same time |
| Smart Phone | iphone, ipap, Android |
| General | |
| Power | DC 12V / POE(optional) |
| Consumption | 3W(MAX) |
| Temperature and humidity | -10°C~55°C,20-80%RH (no condensation) |
| Pitch of IR-CUT screw holes | 22mm |
| Size | 38x38mm |
| JP1 powerinterface | |
| 1 | DC 12V |
| 2 | video GND |
| 3 | Analog video CVBS output |
| 4 | GND |
| JE1 network interface | |
| 1 | RJ45_1 (TX+) |
| 2 | RJ45_2 (TX-) |
| 3 | RJ45_3 (RX+) |
| 4 | RJ45_6 (RX-) |
| 5 | network connect indicator light (green light) |
| 6 | network status indicator light(yellow light) |
| J1 IR-CUT interface | |
| 1 | IR-CUT control signal 5V |
| 2 | IR-CUT control signal 5V |
| J2 DC auto irisinterface | |
| 1 | drive- |
| 2 | damping- |
| 3 | damping+ |
| 4 | drive+ |
| J5 IR light board interface | |
| 1 | IR light board12V power output |
| 2 | GND |
| 3 | IR return signal input(range:0.8V-12V) |
| 4 | IR light enable control |
| JOV1 video loop outport | |
| 1 | Analog video output |
| 2 | GND |
| J6 function interface | |
| 1 | audio input |
| 2 | audio GND |
| 3 | audio output |
| 4 | GND |
| 5 | reset, resume to default setting |
| 6 | alarm input, effective for low level |
| 7 | NULL |
| 8 | NULL |
| 9 | RS_485+ |
| 10 | RS_485- |
| JU1 | |
| 1 | GND |
| 2 | USB DP |
| 3 | USB DM |
| 4 | 5V power output |
| J7 | |
| 1 | USB_DP |
| 2 | USB_DM |
| 3 | 5Vpower output |
| 4 | GND |
| 5 | SD card pull-up resistance power |
| 6 | SD card detection signal |
| 7 | SD card time colock cable |
| 8 | SD card Data cable DATA3 |
| 9 | SD card Data cable DATA0 |
| 10 | SD card Data cable DATA1 |
| 11 | SD card command cable CCMD |
| 12 | SD card connect power to enable GPIO |
| 13 | SD card Data cable DATA2 |
| 14 | alarm output GPIO |
| 15 | NULL |
| 16 | NULL |
-EP for extra POE support